Enjoying tender meat everything is an easy job. You can get this done with the meat cuber tenderizer that gives great results without putting a lot of efforts. But wait, before you get any of these tenderizers in the market. For the most efficient and durable product you should look deep into the specifications. We’ve made it sure to bring for you the top 10 best meat cubers tenderizers in 2020 Reviews. Also, get a look at the buyer’s guide at the end of this article.
Table of the Best Meat Cubers Tenderizers
01. WESTON presents Heavy-Duty Sturdy Aluminum Meat Cuber Tenderizer (07-3101-W-A)
We purchased the Weston Manual Heavy Duty Meat Cuber Tenderizer only two weeks back. So far, the results have been overwhelming. It has got really sharp blades that make tenderizing the meat so easy. We purchased the one with a single clamp. In hindsight, it would have made more sense had we gone for the one with double clamps as our choice of meat includes Duck, Deer, and beef which are all tough. It works amazingly well with chicken breasts and pork though. Overall, it’s a quality product and good value for your money.
02. SPORTSMAN presents Meat Cuber/Tenderizer SM07492
At around $35, it’s a steal! Sportsman SM07492 Meat Tenderizer/Cuber has got a sturdy look to it and works fine enough. It has got fixed rollers, so tenderizing meats thicker than ½-inch would not be a good idea. Works exceedingly well on packaged boneless pork loin. The tenderizing components are made of hard plastic which works great. The crank handle is a bit slow to work with but not too bad. The body is made of hard cast iron and looks sturdy. One major issue I found with the product is that the unit does not disassemble and, as a result, cleaning becomes messier. Stay away though if you are looking for a tenderizer for thicker meats.
03. Tripple3Vee presents Commercial Quality Heavy Duty Meat Tenderizer
Product is cheap and works exactly like that. Weighing at 1.8 kgs, it’s not really easy to move around. The Cuber works fine but tenderizing thicker meats would be an issue. Even flattening chicken breasts would be difficult as the machine works only with paper-thin meat. The grinder had a real low grade coating and was coming off at the edges. Works quite well with boneless chicken though. It works like a dream on deer meat too although its plastic rollers won’t work too well on beef or pork. The rollers won’t allow the meat to go through if it is wider than 4”. Cleaning is easy. Just keep the rollers under warm water for a while and brush it off using a smooth brush.
04. WESTON presents Heavy Duty Manual Meat Cuber Tenderizer 07-3101-W-A
Quality does come at a premium. I had my doubts before ordering the product. But boy! It’s the best your money can buy. I have been using it for the last three months now and it never gave me any troubles. Weighing at ten pounds, the product is surprisingly easy to work and store. Works equally well on both soft and tough meats. Used it on the pork loins and was amazed at the perfectly cut pork steaks. Stainless steel blades cut through the meat perfectly. Has got a sturdy look and the main body is made of hard cast iron. If cubed meat is your preference for chicken fried steaks, look no further. Take my word for it.
05. KITCHENER presents Stainless Steel Heavy Duty Meat Tenderizer and Jerky Slicer
I purchased KITCHENER- Heavy Duty Stainless Steel Vertical Meat Tenderizer and Jerky Slicer (Meat Tenderizer) six months back and have used it extensively on various occasions ever since. You should try the tender fried chicken steaks that this machine makes. It’s simply out worldly. It comes with two tenderizing blade rollers and two slicing blade rollers as well which are interchangeable. Have tried slicing up 11 jerky strips at one go and found their claim to be true. It is quite heavily built too and cut meats up to ¾” thick without a fuss. The powerful handle makes it super easy to work with. It’s easily one of the best buys I have ever made on Amazon.
06. WESTON presents PRO Series Meat Cuber/Tenderizer 01-3201-W-A
Works just okay without being extra ordinary. At the price it sells, there are better options available on Amazon. Assembling it to your grinder will give you jitters. You will end up scratching your head in disgust if you find out that the tenderizer doesn’t fit your grinder. Yes, that may happen! It will fit only with a Weston meat grinder. We tried it on cubing deer meat as well as beef and the results were satisfactory. Again, nothing worth a mention. On many occasions, the meat kept wrapping around the rolls. You will be well advised to cover the machine with a plastic when not in use. One good thing about the machine is that it weighs just 7.6 pounds unlike its heavier counterparts.
07. WESTON presents Motor Attachment 2-Speed for Manual Cuber/Tenderizer and Jerky Slicer 01-0103-W
Weston 01-0103-W Motor and Mounting Bracket is an average buy at best. We purchased it just two weeks back and have used it twice. The equipment is easy to use and weighs only 3.6 pounds. Yup! You got that right. Tenderizer works fine enough but the Cuber keeps getting bogged down. The electric motor is quite noisy and might annoy some users. It did get on our nerves pretty quickly. The rollers wouldn’t really flatten out your meat as it proclaims. It just makes small cuts in your meat to tenderize it. Cleaning up this machine is a messy affair, to say the least. Look away if you are expecting a hassle-free meat tenderizer. Not a perfect buy at all.
08. GSG Home Series presents Heavy Duty Commercial Meat Tenderizer
Commercial Meat Tenderizer Cuber Heavy Duty Steak Flatten Hobart Kitchen Tool is yet another addition to the list of underperformers. We purchased it only for the reason that it came cheaper than its alternatives. In hindsight, it wasn’t a great way to make the purchase at all. It claims to tenderize tough cuts of meat without pounding. Don’t be fooled by it. It is all just hogwash. The clamp-on design that it has got is then only good thing about it as it is easy to attach it to a table or counter top. Don’t use it to tenderize meat thicker than ½-inch. Worthless product! There are so many ways to put your money to a better use.
09. WESTON presents Realtree Outfitters Manually Operated Meat Tenderizer
Weston Realtree Outfitters Manual Meat Tenderizer & Jerky Slicer – Slicer/Cuber/Tenderizer is a quality buy. I was able to cut ¾-inch thick ‘eye of the round’ beef rather easily using this machine. It comes with both the tenderizer and the jerky cutter. The Cuber works perfectly fine for me. The blades are razor sharp and cut the jerky in no time. Ever since I’ve started using this machine, meat processing has become super easy. Just cut your meat into smaller sizes and you are good to go. We learned this at our own expense when we used a bigger slice. It ended up getting stuck in the shoot/blades. The blades aren’t stainless so keeping them dry after use is critical. Other than that, I have no issues whatsoever. Awesome product!
10. WESTON presents Brand Manual Single Support Meat Cuber Tenderizer
Weston Brand Manual Single Support Meat Cuber / Tenderizer is a great addition to the reputed Weston Brand. Bought it about a month back for my parents and they absolutely loved it. It is sturdily built and also boasts of a durable food-safe coating. It was easy to mount it on the countertop. My father used 1 ¼ inch thick meat for tenderizing and it did the job perfectly. The machine can be disassembled easily which makes clean-up much easy. They also provided a countertop protector so that it doesn’t leave scratch marks on the surface. Clever, isn’t it? I am planning to buy one for myself pretty soon. It’s a five-star product. Worth every penny!
Buyer’s Guide for the Best Meat Cubers Tenderizers
This part of your machine is very important as it is directly going to affect the quality of meat you’ll get. Blades made from stainless steel are durable and the blades cut even the toughest of the meat. Thus sharp blades prevent jamming the meat and give the best results every time.
You should make sure that the machine is easy to assemble and dismantle. This will help you clean the machine easily without getting messed up with it. Get the fine service by checking the construction of a meat cuber tenderizer.
When you put meat in the inlet all the result depends on rotating the handle. To bear all the pressure to tenderize the meat the handle needs to be heavy duty and durable. This will ensure a long life service with low maintenance.
Tender Meat for You
Millions of people cannot imagine their life without meat. If you’re one of them you getting tender meat would be the first choice you would be looking for. And why not, if you have the best meat cuber tenderizer at your home you’ll be getting the best cuisines ready for you. Choose one of the machines from this list and you’ll get the regret-free results every time.